Rehabilitation of a shaft berm and channel
Type of building | Number of buildings | Material used | Methods used | Executing company |
|---|---|---|---|---|
Shaft structure / concrete | 1 shaft | Reprofiling work: ERGELIT-KS1 Infiltrations: Hermes-WS Coating system: HermesConnect-3C | HermesConnect-3C local laminate | Meyer Disposal Ralf Sieves |
- Type of structure: Shaft structure / concrete
- Number of structures: 1 shaft
- Materials used: Reprofiling work: ERGELIT-KS1 / Infiltrations: Hermes-WS / Coating system: HermesConnect-3C
- Methods used: HermesConnect-3C local laminate
- Executing company: Meyer Entsorgung / Ralf Sieves
Task definition:
In this project, the focus was on permanently sealing the shaft floor, berm and channel and coating them with a highly corrosion-resistant synthetic resin system. Our tried-and-tested HermesConnect-3C local laminate was used, which is characterized by its excellent properties and safe processing.
A particular advantage of this product is that it does not contain styrene, which makes processing much more pleasant for our employees.
Implementation time
Brief description of the project:
- Cleaning the substrate: The shaft was thoroughly cleaned with a needle gun and water to remove loose concrete and impurities.
- Reprofiling: To create an even surface, our ERGELIT-KS1 was applied in a layer of around 1 cm and then finished with a broom finish.
- Application of HermesConnect-3C: After complete curing of the ERGELIT-KS1, the local laminate was applied layer by layer.
The HermesConnect-3C hardens within about an hour, so that the structure could be put back into operation immediately.
The result: the customer is extremely satisfied, and the building is now optimally protected against aggressive industrial wastewater - ready for the requirements of the next generation.
