- Due to its bilateral properties, it can offer both the advantages of a foam resin and those of a high-strength resin
- Successful sealing against flowing water and water inflows from building walls
- Available ex works in three reaction speeds
Further properties
The Hermes Power Inject is available in three different speed levels:
Hermes-PowerInject 3000/120/30 where 30 is the fastest version.
It can be accelerated as required with the HT-Turbo additive and can be processed into a low-foaming, very dense PUR body on contact with water (solid texture) or cured with the HT-Foam additive to form an ever-foaming, closed-cell foam body.
Due to its bilateral properties, it can therefore be used either with the advantages of a foam resin as well as with those of a high-strength resin, come up with.
- High viscosity
- Available in both slow and fast curing
- Available in 10l or 20l canisters
- Can be accelerated as required with the additive HT-Turbo = solid PUR body
- Hardens with the additive HT-Foam to an ever-foaming, closed-cell foam body
- Tested according to EN1504-5
- Ecotoxicological investigation (investigation of elution behavior) MFPA Leipzig GmbH
- CFC- and halogen-free
- Ecologically harmless
- No shrinkage behavior
- Reaction time is accelerated by contact with water
Application
- Suitable for the permanent sealing of small cavities through to heavy infiltrations in structures such as shafts or accessible ducts
- For stabilizing or restoring the old pipe floor system
- Suitable for projects where no further renovation measures are carried out (curtain injection)
- The resin is injected in large quantities from the canister through an injection pump and via an impact packer / steel packer with non-return valve behind the structure
- The catalyst can be used to adjust the reaction time precisely to the conditions, whereby the reaction time is also accelerated by water
/steelpacker/0101_steelpacker_injection_packer_product_image.png)
