- Fast response time
- Maximum volume increase
- Easy to process using an injection pump
- Highly closed-cell and non-crumbling foam body
- Accelerator is added separately on site = high storage stability
Further properties
The resin is suitable for pre-sealing or 2-phase injection in combination with the HERMES-FlexSeal PUR or the HERMES Power Inject series.
Due to the extremely fast reaction time in combination with water and the enormous but fine-pored increase in volume, it is perfectly suited for temporary sealing against pressing water and for large damaged areas / cavities, water ingress and pressure.
The material also presses into cracks and construction joints and solidifies loose rock, rock, concrete and masonry.
- Fast reaction time - accelerated by contact with water
- Large, fine-pored foam body
- No shrinkage behavior
- High chemical resistance
- Absolutely low viscosity
- CFC- and halogen-free
- Tested according to EN1504-5
- Available in both 10l and 20l canisters & the catalyst in 1l / 2l canisters
Application
- Suitable as temporary pre-sealing for very large cavities behind a structure
- Successful sealing against penetrating groundwater
- Very easy to use
- Easy handling with steel packer and 1K piston pump
/steelpacker/0101_steelpacker_injection_packer_product_image.png)
