- Kanaltec iS tested and certified according to DIN 19573 in exposure class XWW3
- Is highly thixotropic
- Has high colloidal behavior
- Can be retarded with the additive ERGELIT-VZG or accelerated with the additive ERGELIT-BSL
Further properties
ERGELIT-Kanaltec iS is the smart alternative to its big brother ERGELIT-Kanaltec cF. This mortar is your answer to the requirements of socket renovation when maximum crack resistance is not the top priority.
ERGELIT-Kanaltec iS is a versatile one-component injection mortar that focuses on the essentials. In contrast to its fiber-reinforced counterpart, ERGELIT-Kanaltec iS offers you a solid basis for your rehabilitation projects. Its granular powder with an aggregate size of less than 0.5 mm lays the foundation for efficient results.
From liquid to plastic - ERGELIT-Kanaltec iS adapts to your requirements and proves to be a reliable choice for socket renovation.
Even if the fibers are missing, ERGELIT-Kanaltec iS remains a reliable solution. Please note, however, that the strength values are not as high as with its big brother due to the lack of fibers. The curing time is also slightly longer.
Trust in quality and standards. With ISO 9000 production, EN 1015 monitoring and our proven expertise, we ensure that ERGELIT-Kanaltec iS meets your requirements.
- Grain size up to 0.5 mm, granular powder
- Color: grey (after adding water)
- Highly thixotropic
- Room-resistant; shrinkage-compensated in the duct
- High adhesive strength
- High adhesion to the substrate
- Demolding time after approx. 60 min at 20° C
- Colloidal behavior
- Impermeable to water in accordance with DIN 1045
- Resistant to common components found in waste water
- against strong attacks Exposure class XA1 EN 206, DIN 1045, resistance class III according to GSTT Info No. 18
- Long-term stability at pH 4.5 - 9
Application
- Processing time at 20 °C approx. 10 - 15 minutes, depending on the amount of water added
- Can be retarded with the additive ERGELIT-VZG or accelerated with the additive ERGELIT-BSL
- Is suitable for the Hermes Kanaltec 4.0 system and other inlet rehabilitation robots. These systems are also very suitable for the lined sewer
- Consistency: liquid to plastic to work with
- Can be used in all water protection zones
- Pumpable up to 100 m
