- ERGELIT-Kanaltec cF is tested in accordance with DIN 19573 XWW3. The ERGELIT-Kanaltec cF has also been in possession of DIBT approval for over 15 years, which has been replaced by DIN 19573
- Is highly thixotropic and thus ensures a very fast sealing effect in the event of heavy water ingress
- Has colloidal behavior and is therefore very difficult to mix or demix with groundwater
- Can be retarded with the additive ERGELIT-VZG or accelerated with the additive ERGELIT-BSL
- Is suitable for all robot systems that can work with mortar (Kanaltec 4.0)
Further properties
ERGELIT-Kanaltec cF is more than just a mortar - it is your answer to the most demanding challenges. This cementitious one-component injection mortar, with organic and inorganic additives and a fiber additive, leads the innovation. Its aggregate size of less than 0.5 mm and the fiber additive for increased crack resistance provide the ideal basis for impressive results.
From liquid to plastic - ERGELIT-Kanaltec cF adapts to your needs and shows its strengths when used with Kanaltec robot systems. Regardless of whether you are renovating poorly integrated side inlets or sealing the annular gap between the old and new pipe in the area of the side inlet - ERGELIT-Kanaltec cF is your reliable partner.
Its highly thixotropic nature enables rapid sealing in the event of heavy water ingress, while its colloidal behavior masters contact with groundwater. The high adhesive strength and adhesion to different substrates set new standards.
ERGELIT-Kanaltec cF brings robustness and durability to every project. Resistant to common components found in wastewater, strong attacks and a pH range of 4.5 to 12, it meets the toughest requirements.
Trust in the mortar that combines quality and standards. With ISO 9000 production, EN 1015 monitoring and DIBT approval (which has been replaced by DIN 19573), we stand for the highest level of quality protection. And don't forget - ERGELIT-Kanaltec cF is tested in accordance with DIN 19573 XWW3 - Resistant especially for municipal wastewater.
- Grain size up to 0.5 mm, with fiber additive
- Color: reddish (after adding water)
- Highly thixotropic
- Room-resistant; shrinkage-compensated in the duct
- High adhesive strength
- High adhesion to the substrate
- Demolding time after approx. 40 min at 20° C
- Colloidal behavior
- Impermeable to water in accordance with DIN 1045 at 0.5 bar < 4 mm water penetration depth
- Increased crack resistance
- Resistant to common components found in waste water
- Against strong attacks, exposure class XA2 EN 206, DIN 1045, resistance class III according to GSTT Info No. 18
- Long-term stability at pH 4.5 - 12
Application
- Water-resistant after 35-40 minutes
- Can be retarded with the additive ERGELIT-VZG or accelerated with the additive ERGELIT-BSL
- Is suitable for the Hermes Kanaltec 4.0 system and other inlet rehabilitation robots. These systems are also very suitable for the lined sewer
- Can be used in all water protection zones
- Consistency: liquid to plastic to work with
- Pumpable up to 100 m
