- Very economical impact protection for FZM pipes
- Very easy handling
- Suitable for straight pipes and bends
- Equally effective in above-ground and underground applications
Further properties
The Original ERGELIT Band 03 - Impact protection with a time advantage
Countless piping systems made of steel, cast iron, cement or plastic run through the ground at our feet. They ensure the supply and disposal of water to households and commercial buildings. Permanent protection of the pipes is therefore in everyone's interest.
ERGELIT-Band03 is a tried and tested system for protecting pipes and their joints in new builds, renovations and repairs, offering optimum cost-effectiveness and a high level of safety.
The consumption tables and further information can be found on the following webpage: www.ergelitband.com
- Extremely hard-wearing
- Easy handling
- Prevents corrosion in the affected areas
- Best economic efficiency
- Fast, clean processing
- High security
- Fast curing and full load-bearing capacity after one hour at 20C
- Available in 3 sizes and lengths: 12cm wide and 3m long, 18cm wide and 3m long and 18cm wide and 6m long - other sizes on request
- Very fast wrapping and completion of the project due to 3mm layer thickness per layer
- Without special tools
- Impermeable to water
- Good adhesive strength
Application
- Wrapping of FZM, steel or cast iron pipes
- Wrapping straight cables or bends, fittings or welded joints
- Ideal as impact protection or mechanical protection for FZM-coated pipelines during underground pipe jacking, e.g. in the HDD process
ERGELIT tape 12 cm x 3 m
- Dimensions:
- Width: 12 cm
- Length 6m
- Art. No.: HTD-22002
ERGELIT tape 18 cm x 3 m
- Dimensions:
- Width: 18 cm
- Length 3m
- Art. No.: HTD-22003
ERGELIT tape 18 cm x 6 m
- Dimensions:
- Width: 18 cm
- Length 6m
- Art. No.: HTD-22004
