Procedure manuals
Download now
- Is perfectly suited for wastewater structures with industrial wastewater (highly acid-resistant)
- Is tested according to DIN19573 XWW4 -B2
- Can be applied by hand coating, wet spraying and centrifugal processes
- Is water-resistant after just 2 hours (at 20°)
Further properties
With its outstanding properties and additional benefits, ERGELIT-KS2 is the ideal choice for your construction projects. Here are some of the special features that make ERGELIT-KS2 stand out:
Specially developed for industrial wastewater: When it comes to coating municipal and industrial wastewater structures, ERGELIT-KS2 is unbeatable. It has been specially developed to meet the demanding requirements of these environments. With ERGELIT-KS2 you get a reliable and durable solution for waterproofing this type of aggressive wastewater.
Tested quality and approvals: ERGELIT-KS2 has been tested in accordance with DIN19573 XWW4-B2. This certification confirms the high quality and performance of the material. You can rest assured that ERGELIT-KS2 meets the strict requirements and offers you reliable protection.
Versatile application options: ERGELIT-KS2 offers you a wide range of application options. Whether you need masonry mortar, joint mortar, coating mortar, laying mortar or repair mortar, ERGELIT-KS2 is the perfect choice.
Fast water resistance: With ERGELIT-KS2 you save time and at the same time ensure fast water resistance. ERGELIT-KS2 is water-resistant after just 2 hours at a temperature of 20°C. This fast curing time allows you to speed up the construction process and save time.
Outstanding layer thicknesses: ERGELIT-KS2 can be applied in very high layer thicknesses of up to 3 cm in a single trowel stroke. This exceptional property allows you to tackle even demanding projects efficiently and achieve a high degree of flexibility.
- Grain size 1 mm
- Consistency: plastic to stiff-plastic
- Thixotrope
- Rebound approx. 3 % under good spraying conditions in the wet spraying process
- Highly alkaline
- Very good adhesive tensile strength (≥ 2 N/mm², depending on the substrate)
- High adhesive strength = very high layer thicknesses possible
- High abrasion resistance
- Sulphate resistant
- Impermeable to water
- Frost and de-icing salt resistant
- Waste water temperature: short-term peaks up to 100° C, long-term up to 90°
- Shrink and shrinkage-free in the pipe
- Corrosion protection against industrial wastewater between pH 3 - 11
Application
- Coating of concrete and masonry shafts, sewers and storage tanks
- For waste water containing e.g. sulphate, magnesium, ammonia, oil, grease, benzene, petrol, chemically aggressive environment
- Suitable for the wet spraying process or the KS-ASS coating system
- Integrated bonding bridge already included in the product (primer)
- Can be applied in layer thicknesses of up to 3 cm in one trowel pass
- In good conditions also overhead
- Reprofiling of break-outs and defects in shafts, sewers and storage tanks, as well as surface leveling in masonry shafts
- Production of coving and berms
- An all-round mortar for coating and repairing wastewater structures with municipal and industrial wastewater
- Sealing against pressing groundwater
- Pumpable up to 100 m
- Can be used in drinking water protection zones
- Not suitable for open structures
/2.%20Renovierungsverfahren/1.%20Automatische%20Schachtbeschichtung%20KS-ASS/Schacht_vorher.jpg)
/2.%20Renovierungsverfahren/1.%20Automatische%20Schachtbeschichtung%20KS-ASS/Photo%2027.11.21,%2008%2053%2010.jpg)
/2.%20Renovierungsverfahren/3.%20Nassspritzverfahren/Photo%2007.12.21,%2022%2007%2035.jpg)
